According to the characteristics of hydrogen peroxide, the following safety precautions should be taken while carrying out safety education, improving safety awareness and strengthening security inspection during use, storage and transportation
1 The packaging, storage and transportation of hydrogen peroxide shall be in plastic or stainless steel containers, and its upper cover shall be equipped with dust-proof exhaust ports to safely release the gas that may be generated and avoid explosion
2 Hydrogen peroxide is a strong oxidant and corrosive, so attention should be paid to painting "Figure 9 oxidant mark" and "Figure 18 corrosive article mark" specified in GB190 and "Figure 3 upward mark" specified in GB191 on the shipping container
3 Organize transportation according to the transportation rules of oxidant to prevent violent vibration
4. Hydrogen peroxide should be stored in a cool and ventilated warehouse. Avoid direct sunlight or heat during storage and transportation
5. It is strictly prohibited to store and transport with alkali, metal and metal compounds, inflammables, reducing agents, etc
6 Do not touch the hydrogen peroxide directly with your hands. Wear plastic gloves during operation. When the hydrogen peroxide is contaminated with the human body or splashed into the eyes, immediately wash it with a large amount of water or 3% KMnO4 solution.
7 If the package is cracked and leaked or when the leaked hydrogen peroxide comes into contact with combustible substances, it should be washed off immediately with a large amount of water
In short, as long as hydrogen peroxide is produced, used, stored and transported according to safety regulations, relevant accidents can be completely avoided.
